Three Phase Brake Motors

We are manufacture, exporter and supplier of brake motor. Basically Brake motor is combination of brake and motor.

Brake Type

we are manufacture, exporter and supplier of two type of brake motor.

Fail Safe Brake (When power off shaft lock)

Fail safe brake motor in case of power supply off ensuring further to a precise stop and quick braking action, the security of sudden inter venations in case of an unintentional power supply failure (i.e. power supply black-out, equipment failure)The braking action is obtained without axial sliding of shaft and provides equal braking torque in both directions of rotations. It is Fail safe brake motor.

Normally off type brake (when power supply on shaft lock)

Normally off type brake is totally different type of brake in compare of failsafe. it works when supply on. It help to stop machine when need to stop. Like when need to machine or equipment in situation of emergency.

Range of Production

Three Phase Brake Motor

0.25 H.p. to 30 H.p. (0.18 K.W. to 22 K.W.) Frame 63 to 180L in 2, 4, 6, 8, 10 & 12 Pole

Mounting Type

  • Foot (B3)
  • Flange (B5)
  • Face (B14)

Frame

Brake Motor is supplied in a robust, rugged cast iron frame with integral feet. On Request we can supply motor in aluminum body up to 100 L frame.

Insulation

All break Motor supply with class F insulation as standard feature. Also supply H on request of customer.

Ratings

  • Continues Duty Brake Motor (S1)
  • Short time Duty (S2)
  • Intermittent periodic Duty (S3)
  • Intermittent duty with Starting Duty (S4)
  • Intermittent duty with starting & ele. Braking (S5)

Voltage and Frequency

Three Phase Brake Motor Supply volts 415 ± 5% 50 Hz. ± 3% customer request we are also able supply motor in 220, 380, 460, 525 volts on HZ. 50 or 60 Also

Protection

We are supply motor with Ingress protection 44 as defined in IS: 4691. Motors can be supplied with IP-54 and IP-55 on request.

Shaft & Rotor

Rotor is positive locking with Shaft key joint so that cannot move on high Full lord Torque. Shafts are made by En-8 or En-9 material. Rotors are of high-pressure E.C. Grad aluminum die-cast. Every rotor is dynamically balanced. Its make motor low amplitudes of Vibration & noise.

Bearings & Lubrication

Bearings are adequately lubricated with lithium based high temp up to 150 deg. All the motors are supplied with C3 ball bearing & fully charged with lithium base grease at the time of assembly.

Thermal Overload Protection

We can also supply motor with T.O.P Switch on Demand of Customer. It can provide motor extra safety form over lord protection.

Terminal Box

Brake motor Supply with Terminal box on top position For Foot mounted (B3). Others position box like left or right supply on customer request.

Earthing Terminals

All Brake Motor provided with minimum two earthling terminals. One in the terminal box and other at foot.

Application

Brake motor is especially suitable to be used with Lifting Machinery, Textile Machinery, Geared motor, Cable Reeling Drums, Rolling Mills, Machine tools Etc.

Features

  • High efficient
  • Noise Free
  • Vibrating free
  • Low running cost
  • Durable
  • Smooth finishing
  • Cost effective
  • Precision design